Regulating Oxygen Configuration in Hierarchically Porous Carbon Nanosheets for High-Rate and Durable Na+ Storage

Surface oxygen functionalities (particularly C−O configuration) in carbon materials have negative influence on their electrical conductivity and Na⁺ storage performance. Herein, we propose a concept from surface chemistry to regulate the oxygen configuration in hierarchically porous carbon nanosheets (HPCNS). It is demonstrated that the C−O/C=O ratio in HPCNS reduces from 1.49 to 0.43 and its graphitization degree increases by increasing the carbonization temperature under a reduction atmosphere. Remarkably, such high graphitization degree and low C−O content of the HPCNS-800 are favorable for promoting its electron/ion transfer kinetics, thus endowing it with high-rate (323.6 mAh g⁻¹ at 0.05 A g⁻¹ and 138.5 mAh g⁻¹ at 20.0 A g⁻¹) and durable (96 % capacity retention over 5700 cycles at 10.0 A g⁻¹) Na⁺ storage performance. This work permits the optimization of heteroatom configurations in carbon for superior Na⁺ storage.     

Correction to: Kadec-Klee property in Musielak-Orlicz function spaces equipped with the Orlicz norm

Aequationes mathematicae -     

A novel lipid droplets-targeting fluorescent probe based on dicyanisophorone and carbazole for Cu2+ and its application

A novel fluorescent probe, LCH , based on dicyanisophorone and carbazole, was prepared for the visual detection of Cu²⁺. The probe LCH could recognize Cu²⁺ by fluorescence quenching in EtOH/H₂O (1/4, v/v) solution, which could be easily identified under the 365 nm UV lamp, and the detection limit was as low as 0.785 μM. The recognition mechanism of probe LCH with Cu²⁺ was determined by combining ¹H NMR titration, MS, and theoretical calculations. Practical application experiments showed that probe LCH could be used to detect Cu²⁺ in the test strip experiments. Cell imaging experiments showed that the probe LCH owned good cell permeability and could be applied to the imaging of Cu²⁺ in HepG2 cells. In addition, fluorescence colocalization experiments showed that LCH could target lipid droplets. These results indicate that the probe LCH will have a good application prospect in environmental detection and clinical medicine.     

Bonding situations in tricoordinated beryllium phenyl complexes

The bonding situation in the tricoordinated beryllium phenyl complexes [BePh₃]⁻, [(pyridine)BePh₂] and [(trimethylsilyl-N-heterocyclic imine)BePh₂] is investigated experimentally and computationally. Comparison of the NMR spectroscopic properties of these complexes and of their structural parameters, which were determined by single crystal X-ray diffraction experiments, indicates the presence of π-interactions. Topology analysis of the electron density reveals elliptical electron density distributions at the bond critical points and the double bond character of the beryllium-element bonds is verified by energy decomposition analysis with the combination of natural orbital for chemical valence. The present beryllium-element bonds are highly polarized and the ligands around the central atom have a strong influence on the degree of π-delocalization. These results are compared to related triarylboranes.     

Enhanced electrochemical performance of LiNi0.83Co0.12Mn0.05O2 cathodes with a fast-ion conductor Li0.33La0.56TiO3 coating layer

Journal of Solid State Electrochemistry - Ni-rich layered cathode materials LiNixCoyMn(1-x–y)O2 (x ≥ 0.8) suffer from capacity decay due to structural deterioration during...     

Charge Density Overcomes Steric Hindrance of Ferrocene Surfactant in Switchable Oil-in-Dispersion Emulsions

A ferrocene surfactant can be switched between single and double head form (FcN⁺C₁₂/Fc⁺N⁺C₁₂) triggered by redox reaction. FcN⁺C₁₂ can neither stabilize an O/W emulsion alone nor an oil-in-dispersion emulsion in combination with alumina nanoparticles due to the steric hindrance of the ferrocene group. However, such steric hindrance can be overcome by increasing the charge density in Fc⁺N⁺C₁₂, so that oil-in-dispersion emulsions can be co-stabilized by Fc⁺N⁺C₁₂ and alumina nanoparticles at very low concentrations (1×10⁻⁷ M (≈50 ppb) and 0.001 wt %, respectively). Not only can reversible formation/destabilization of oil-in-dispersion emulsions be achieved by redox reaction, but also reversible transformation between oil-in-dispersion emulsions and Pickering emulsions can be obtained through reversing the charge of alumina particles by adjusting the pH. The results provide a new protocol for the design of surfactants for stabilization of smart oil-in-dispersion emulsions.     

A Robust Metal-Organic Framework with Scalable Synthesis and Optimal Adsorption and Desorption for Energy-Efficient Ethylene Purification

Adsorptive separation is an energy-efficient alternative, but its advancement has been hindered by the challenge of industrially potential adsorbents development. Herein, a novel ultra-microporous metal-organic framework ZU-901 is designed that satisfies the basic criteria raised by ethylene/ethane (C₂H₄/C₂H₆) pressure swing adsorption (PSA). ZU-901 exhibits an “S” shaped C₂H₄ curve with high sorbent selection parameter (65) and could be mildly regenerated. Through green aqueous-phase synthesis, ZU-901 is easily scalable with 99 % yield, and it is stable in water, acid, basic solutions and cycling breakthrough experiments. Polymer-grade C₂H₄ (99.51 %) could be obtained via a simulating two-bed PSA process, and the corresponding energy consumption is only 1/10 of that of simulating cryogenic distillation. Our work has demonstrated the great potential of pore engineering in designing porous materials with desired adsorption and desorption behavior to implement an efficient PSA process.     

Photoenzymatic Hydrosulfonylation for the Stereoselective Synthesis of Chiral Sulfones

Chiral sulfones are recurrent motifs in pharmaceuticals and bioactive molecules. Although chemical methods have been developed to afford α- or β- chiral sulfones, these protocols rely heavily on the pre-synthesis of structurally complicated starting materials and chiral metal complexes. Herein, we described a photoenzymatic approach for the radical-mediated stereoselective hydrosulfonylation. Engineered variants of ene reductases provide efficient biocatalysts for this transformation, enabling to achieve a series of β-chiral sulfonyl compounds with high yields (up to 92 %) and excellent e.r. values (up to 99 : 1).     

Coordinating the Edge Defects of Bismuth with Sulfur for Enhanced CO2 Electroreduction to Formate

Bismuth-based materials have been recognized as promising catalysts for the electrocatalytic CO₂ reduction reaction (ECO₂RR). However, they show poor selectivity due to competing hydrogen evolution reaction (HER). In this study, we have developed an edge defect modulation strategy for Bi by coordinating the edge defects of bismuth (Bi) with sulfur, to promote ECO₂RR selectivity and inhibit the competing HER. The prepared catalysts demonstrate excellent product selectivity, with a high HCOO⁻ Faraday efficiency of ≈95 % and an HCOO⁻ partial current of ≈250 mA cm⁻² under alkaline electrolytes. Density function theory calculations reveal that sulfur tends to bind to the Bi edge defects, reducing the coordination-unsaturated Bi sites (*H adsorption sites), and regulating the charge states of neighboring Bi sites to improve *OCHO adsorption. This work deepens our understanding of ECO₂RR mechanism on bismuth-based catalysts, guiding for the design of advanced ECO₂RR catalysts.     

Alloying-Triggered Phase Engineering of NiFe System via Laser-Assisted Al Incorporation for Full Water Splitting

It is challenging to design one non-noble material with balanced bifunctional performance for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for commercial sustainability at a low cost since the different electrocatalytic mechanisms are not easily matchable for each other. Herein, a self-standing hybrid system Ni₁₈Fe₁₂Al₇₀, consisting of Ni₂Al₃ and Ni₃Fe phases, was constructed by laser-assisted aluminum (Al) incorporation towards full water splitting. It was found that the incorporation of Al could effectively tune the morphologies, compositions and phases. The results indicate that Ni₁₈Fe₁₂Al₇₀ delivers an extremely low overpotential to trigger both HER (η₁₀₀=188 mV) and OER (η₁₀₀=345 mV) processes and maintains a stable overpotential for 100 h, comparable to state-of-the-art electrocatalysts. The synergistic effect of Ni₂Al₃ and Ni₃Fe alloys on the HER process is confirmed based on theoretical calculation.